Plate-making method of group on a day for

Plate-making method

Liquid resin plate-making	It is the plate-making using the liquid photosensitive resin of ASAHI KASEI. An offer with the APR resin with the results and the resin of latest TENA is possible. Flexibility of the thickness setting of the version is high and is used a lot with corrugated cardboard print mainly. The thickness of the version is available for setting by a 1/100 mm unit at 2mm - 8mm. It is the plate-making of the water developing type without the solvent.
Solid resin plate-making	It is plate-making using the board-formed photosensitive resin. Various versions materials are provided by each maker. The thickness precision of the version is high, and the plate-making that is a high hair stroke is possible. It is used in for a seal label, soft packing, paper bag, the pre-print, coater and corrugated cardboard print widely. The thickness of the version becomes 0.43mm - 7.5mm. Various kinds of materials are provided by each maker. I provide it in the most suitable materials by the use of the customer The plate-making of the water developing type without the solvent and the plate-making of the solvent developing type said that taisuri/plasticity is good are possible.
Plate-making using Esko XPS Crystal (Energy Service Company company UV LED exposure machine)	This exposure equipment can remove the equalization of the exposure condition at the time of the exposure, realization of the stabilization and the oxygen inhibition by the innovative technique that UV LED light technology father says. By this, I can stabilize the depth of the version. Furthermore, I come to be able to provide the high-quality versions that I handled such as a microcell or the flat top dot to a customer. I make possible high-quality stable plate-making by exposing imaging by our system to the resin version which went in CTP. In addition, I can realize the print of the unprecedented clean net point by using special screen.
CTP flexo plate-making (ESKO CDI SPARK) LAMS	It is plate-making using the board-formed photosensitive resin. Various versions materials are provided by each maker. Using a fiber laser, I perform CTP plate-making from data directly. The plate-making such as the plate-making that is a high hair stroke or the sharp white letters on a colored background is possible because I do not use a film. I use CTP facilities of Energy Service Company company. The plate-making of the water developing type without the solvent and the plate-making of the solvent developing type said that taisuri/plasticity is good are possible.
Kodak Flexcel NX version (kodakkufurekuseru NX)	It is for the high reproduction flexo which Kodak Corporation provides. It is for a new generation flexo realizing print quality of an offset and the gravure in a version to be good at a reproducible good point and the flat top dot (FLAT TOP DOT). In addition, the version materials for corrugated cardboard print are offers, too. Please refer for the thickness of the providable version.
Laser sculpture plate-making	Using a semiconductor laser and a CO₂ laser, I perform CTP plate-making from data directly. The plate-making that is minute in a high hair stroke is possible. Plate-making for a roll is enabled and can perform the plate-making of the endless pattern. It is used in a seal label, a pre-print. I am suitable for the print using the endless (seamless /ITR) version. It is the eco-friendly plate-making system which does not use solvents by a plate-making process. The production such as relief printing, the emboss version is possible. The offer for rubber is possible.
Various rubber rolls version Silicon roll version	I surround materials such as rubber or the silicon to an iron core roll or a sleeve and make a plate. I make an endless (seamless /ITR) version, and the print of the endless (seamless /ITR) pattern is possible.
Casting rubber plate-making	It is plate-making using a natural rubber and the synthetic rubber. Made use of materials of the rubber in the plate-making with the results with long history; can print it.
Metal plate-making	It is plate-making using metal such as zinc or the stainless steel. It is used in a drawing type, foil push.
Hand-carving version	I make a plate by hand-carving in a rubber version or a rubber roll. The plate-making that relatively cost-cut it is possible. There is a limit for hand-carving. I can make a plate of a very big version and a clear-cut version.
Version for the coating (coater version)	Using our each version materials to have, I can provide a version of (for the varnish coater) for the most suitable coating that was correct in the request of the customer. The offer of the version to be able to make a quantity of application of the ink (film thickness) into as much as possible is possible.